IO-Flasher PRO – STM8
IO-FLASHER PRO– STM8 is a advance version of IO-FLASHER – STM8. it is programming tool for STM8 series microcontroller. IO-FLASHER – STM8 is capable to program on-chip FLASH, EEPROM and Option Byte memory of STM8 microcontroller. . IO-FLASHER – STM8 is designed to flash the target device in stand alone mode(Without PC) or host controller mode(With PC)
PRO Features of IO-Flasher PRO STM8
Limit Counter
Limit counter can set to stop offline programming after counter reached.
Serial Number Programming
Any serial number can be programmed to target MCU with automatic incrementing.
Password protection
You can protect you programmer with a password to protect it from erase or rewriting. This will also prevent the Limit counter status.
LCD Display
IO-Flasher PRO– STM8 has interactive OLED LCD Display
Program Menu
It stores all project settings from GUI to work independently without GUI. This Menu shows all settings done from GUI.
In-built Protection
All external port protected with ESD, Short circuit and over current. Isolation is available in Isolated version of IO-FLASHER (e.g. IO-FLASHER -STM8/ISOL)
Regular Features of IO-Flasher PRO STM8
Offline Mode
Stand-alone SWIM programmer (Once set up, Flasher can be controlled without the use of PC program). Programming starts with simply button press.
Standard Programming Connector
Standard 4-Pin SWIM connector compatible with STMicroelectronics STM8 Eval board programming connectors.
Online Mode
Programming can be done directly from IO-FLASHER GUI.
Interactive programming
LCD display Programming status, Number of chips programmed. Error codes and meaning on that error code.
Programmable Power Output
No power supply required, Powered through USB. Target board can be power from IO-FLATHER. Output voltage can be adjusted from 0 Volt to ~5Volt depending on selected target device (up to 200mA to target with overload protection)
Target Power Sensing
If target is self-powered or powered from IO-FLASHER, then it can be measured by the IO-FLASHER.
Programming Options
Have many programming options to program Flash, EEPROM, Option memory with auto lock feature
Dual Mode
While IO-FLASHER is configured as offline mode. Its can be still used in online mode for same or different firmware code.
Supported devices
Support for all STM8 devices STM8S, STM8L , STM8AF, STM8AL
IO-FLASHER GUI
Highly professional GUI with simple and user-friendly interface