IO-Flasher – STM8
IO-FLASHER – STM8 is a programming tool for STM8 series microcontroller. IO-FLASHER – STM8 is capable to program on-chip FLASH, EEPROM and Option Byte memory of STM8 microcontroller. . IO-FLASHER – STM8 is designed to flash the target device in stand alone mode(Without PC) or host controller mode(With PC)
Features of IO-Flasher STM8
Standard Programming Connector
Standard 4-Pin SWIM connector compatible with STMicroelectronics STM8 Eval board programming connectors.
Offline Mode
Stand-alone SWIM programmer (Once set up, Flasher can be controlled without the use of PC program). Programming starts with simply button press.
Online Mode
Programming can be done directly from IO-FLASHER GUI.
Program Menu
It stores all project settings from GUI to work independently without GUI. This Menu shows all settings done from GUI.
Dual Mode
While IO-FLASHER is configured as offline mode. Its can be still used in online mode for same or different firmware code.
Programmable Power Output
No power supply required, Powered through USB. Target board can be power from IO-FLATHER. Output voltage can be adjusted from 0 Volt to ~5Volt depending on selected target device (up to 200mA to target with overload protection).
Target Power Sensing
If target is self-powered or powered from IO-FLASHER, then it can be measured by the IO-FLASHER. In-built Protection: - All external port protected with ESD, Short circuit and over current. Isolation is available in Isolated version of IO-FLASHER (e.g. IO-FLASHER -STM8/ISOL)
Programming Options
Have many programming options to program Flash, EEPROM, Option memory with auto lock feature.
Programming Indication
IO-Flashers has LED indication for ready, Programming complete and error state Supported devices: - Support for all STM8 devices STM8S, STM8L, STM8AF, STM8AL
Program Menu
It stores all project settings from GUI to work independently without GUI. This Menu shows all settings done from GUI.
IO-FLASHER GUI
Highly professional GUI with simple and user-friendly interface