IO-Flasher Basic-STM8

Features of IO-Flasher STM8

• Standard Programming Connector: – Standard 4-Pin SWIM connector compatible with STMicroelectronics STM8 Eval board programming connectors.
• Offline Mode: – Stand-alone SWIM programmer (Once set up, Flasher can be controlled without the use of PC program). Programming starts with simply button press.
• Online Mode: – Programming can be done directly from IO-FLASHER GUI.
• Program Menu: – It stores all project settings from GUI to work independently without GUI. This Menu shows all settings done from GUI.
• Dual Mode: – While IO-FLASHER is configured as offline mode. Its can be still used in online mode for same or different firmware code.
• Programmable Power Output: – No power supply required, Powered through USB. Target board can be power from IO-FLATHER. Output voltage can be adjusted from 0 Volt to ~5Volt depending on selected target device (up to 200mA to target with overload protection).
• Target Power Sensing: – If target is self-powered or powered from IO-FLASHER, then it can be measured by the IO-FLASHER.
• In-built Protection: – All external port protected with ESD, Short circuit and over current. Isolation is available in Isolated version of IO-FLASHER (e.g. IO-FLASHER -STM8/ISOL)
• Programming Options: – Have many programming options to program Flash, EEPROM, Option memory with auto lock feature.
• Programming Indication: – IO-Flashers has LED indication for ready, Programming complete and error state
• Supported devices: – Support for all STM8 devices
• oSTM8S, STM8L, STM8AF, STM8AL
• vIO-FLASHER GUI: – Highly professional GUI with simple and user-friendly interface.